Water Systems
 

5 Stage Domestic Reverse Osmosis System (pumped)

This pumped system has 5 stages of filtration. the first 3 are prefilters they are mainly there to protect the membrane. The Membrane which is the heart of the system comes next and is followed by a post filter which polishes the water and improves its taste.

Prefilters:

5 Micron Sediment Filter - Removes dirt, sand & dust.

Granular Activated Carbon - Removes Chlorine, Organic Contaminants, Pesticides and Chemicals.

Carbon Block Filter - Removes Trihalomethanes, Pesticides, Volatile Organic Chemicals and 99.95% of Giardia and Cryptosporidium Cysts.

Membrane: An American Manufactured High Rejection Reverse Osmosis Membrane with Capacity to Produce 189 Litres of Water per day. This Membrane Removes Contaminants Present in your water including up to 99% of Dissolved Salts, Lead, Copper, Barium, Bacterial by-Products, Oestrogen and Silica to Mention a few.

Post Carbon Filter: Designed to improve taste. It removes any residual impurities and odours from the tank and provides a finer conditioning of purified water.

Pump: A booster is used to improve water pressure, helping to maintain a high level of purification and a lower level of reject water.

Tank: the pressurised tank is used to allow the water to collect so that it is right there when you need it.

Faucet: An extra tap is needed to dispense your water.

Fittings Kit: The system comes with a kit that includes an instruction manual, tubing and all the other parts needed to successfully fit.

Free TDS Meter: A TDS meter measures the amount of Dissolved solids in the water , it is used to monitor the effectiveness of the system and is a must for every RO system.

This system can be self - fitted in approx 1 - 2 hours or we offer a fitting service.




 

 

 

 

 

 

Copyright Pure Water (UK) Ltd registered in England No 6249094)